Express 3500 V8-6.6L DSL Turbo (2008)
3. Connect the electrical connectors to the EBCM.
4. For cutaway vehicles, install the splash shield.
Tighten the splash shield bolts to 25 N.m (18 lb ft).
5. Lower the vehicle.
6. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
7. Revise the tire calibration using the Tire Size Calibration function.
8. Verify correct system operation. Refer to Diagnostic Starting Point - Antilock Brake System (See: Testing and Inspection/Initial Inspection and
Diagnostic Overview) .
9. Refer to Control Module References for programming and setup information.
