Express 3500 V8-6.6L DSL Turbo (2008)
6. Install the fuel pipe bracket bolt.
Tighten the fuel pipe bracket bolt to 25 N.m (18 lb ft).
7. Install the EGR coolant pipe. Refer to Exhaust Gas Recirculation Coolant Hoses/Pipes Replacement (LLY, LBZ) (See: Powertrain
Management/Emission Control Systems/Exhaust Gas Recirculation/EGR Cooler/Service and Repair/Exhaust Gas Recirculation Coolant
Hoses/Pipes Replacement (LLY, LBZ)) .
8. Connect the coolant temperature sensor electrical connector.
9. Install the oil fill tube bolts and the oil fill tube.
Tighten the oil fill tube bolts to 25 N.m (18 lb ft).
