Express 3500 V8-6.6L DSL Turbo (2008)
Valve Cover: Service and Repair
Valve Rocker Arm Cover Replacement - Upper Right Side (LMM)
Valve Rocker Arm Cover Replacement - Upper Right Side (LMM) (6.6L)
Removal Procedure
1. Remove the generator. Refer to Generator Replacement (4.3L) Generator Replacement (4.8L, 5.3L, and 6.0L) Generator Replacement (6.6L) .
2. Remove the exhaust gas recirculation (EGR) cooler tube. Refer to Exhaust Gas Recirculation Valve Cooler Replacement .
3. Remove the glow plug nuts (3).
4. Remove the engine wiring harness from the glow plugs.
5. Remove the glow plug harness bracket bolts (1) and nut (2).
6. Remove the fuel rail pressure sensor electrical connector bracket bolt and nut.
7. Remove the bracket from the stud.
