Express 3500 V8-6.6L DSL Turbo (2008)
5. Install the fuel injectors return hose clamp at the left rear of engine (1).
6. Install the fuel feed and return line clamp bolt.
Tighten the bolt to 25 N.m (18 lb ft).
7. Install the fuel injectors. Refer to Fuel Injector Replacement (Left) Fuel Injector Replacement (Right) .
8. Install the engine wire harness to glow plugs.
9. Install wires and nuts to glow plugs.
Tighten the nuts to 2 N.m (18 lb in).
10. Install the upper left valve rocker arm cover. Refer to Valve Rocker Arm Cover Replacement - Upper Left Side (See: Valve Rocker Arm Cover
Replacement - Upper Left Side) .
11. Install the A/C compressor and power steering pump bracket. Refer to Compressor Mounting Bracket Replacement .
