Express 3500 V8-6.6L DSL Turbo (2008)
5. Position the A/C compressor.
6. Install the A/C compressor bolts.
Tighten the bolts to 50 N.m (37 lb ft).
7. Connect the engine harness electrical connectors to the A/C compressor.
8. Install the auxiliary generator idler pulley, if equipped.
Tighten the bolt to 50 N.m (37 lb ft)
9. Install the auxiliary generator bracket bolt and bracket, if equipped.
Tighten the bolt to 50 N.m (37 lb ft)
10. Install the auxiliary generator, if equipped. Refer to Auxiliary Generator Replacement .
11. Install the drive belt. Refer to Drive Belt Replacement (See: Drive Belt/Service and Repair) .