Express 3500 V8-6.6L DSL Turbo (2008)
Tighten the bolts in the sequence shown to 20 N.m (15 lb ft).
5. Install the 2 flywheel housing to upper oil pan bolts.
Tighten the bolts to 50 N.m (37 lb ft).
6. Install the front engine crossmember. Refer to Engine Front Crossmember Replacement (RWD) Engine Front Crossmember Replacement (4WD)
.
7. Install the engine flywheel. Refer to Engine Flywheel Replacement (See: Transmission and Drivetrain/Flex Plate/Service and Repair/Engine
Flexplate/Flywheel Replacement) .
8. Install the lower oil pan. Refer to Lower Oil Pan Replacement (See: Lower Oil Pan Replacement) .
9. Install the oil level indicator tube. Refer to Oil Level Indicator and Tube Replacement (LLY, LBZ) (See: Engine Oil Dip Stick - Dip Stick
Tube/Service and Repair/Oil Level Indicator and Tube Replacement (LLY, LBZ))Oil Level Indicator and Tube Replacement (LMM) (See:
Engine Oil Dip Stick - Dip Stick Tube/Service and Repair/Oil Level Indicator and Tube Replacement (LMM)) .
