Express 3500 V8-6.6L DSL Turbo (2008)
2. Install the intake manifold.
3. Install the intake manifold bolts/nuts.
4. Install the injection pump. Refer to Fuel Injection Pump Replacement .
Right Side
Notice: Refer to Fastener Notice .
5. Tighten the intake manifold bolts/nuts.
Tighten the bolts/nuts in the sequence shown to 25 N.m (18 lb ft).
6. Install the right fuel rail. Refer to Fuel Injection Fuel Rail Assembly Replacement - Bank 2 .
7. Install the center intake manifold. Refer to Center Intake Manifold Replacement (LMM) (See: ) .
