chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Heater Hose > < Coolant Line/Hose|Service and Repair|Page 2572
Page 5
background image

10. Compress the clamp and connect the turbocharger inlet cooling hose/pipe.

11. Position the fuel line and install the fuel line bolt.
12. Install the A/C and power steering bracket. Refer to Air Conditioning (A/C) Compressor and Power Steering Pump Bracket Replacement (LLY,

LBZ)  (See: Engine, Cooling and Exhaust/Engine/Drive Belts, Mounts, Brackets and Accessories/Engine Accessory Bracket/Service and Repair) .

13. Install the drive belt tensioner and generator bracket. Refer to Generator Bracket Replacement (4.3L)  Generator Bracket Replacement (4.8L,

5.3L, and 6.0L)  Generator Bracket Replacement (6.6L)   .

14. Instal the radiator fan. Refer to Fan Replacement  (See: Engine, Cooling and Exhaust/Cooling System/Radiator Cooling Fan/Service and Repair) .

Heater Hose > < Coolant Line/Hose|Service and Repair|Page 2572