chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Cross-Member > < Upper Control Arm Replacement|Page 14065
Page 2
background image

3. Install the lower ball joint retaining nut.

Tighten the nut to 100 N.m (74 lb ft).

4. Install the front coil spring. Refer to Front Coil Springs Replacement  (See: Suspension Spring ( Coil / Leaf )/Service and Repair/Front Suspension

Coil Spring) .

5. Install the tire and wheel. Refer to Tire and Wheel Removal and Installation  (See: Wheels and Tires/Service and Repair) .
6. Lower the vehicle.
7. Check the wheel alignment. Refer to Wheel Alignment Measurement  (See: Alignment/Service and Repair/Wheel Alignment Measurement) .

Cross-Member > < Upper Control Arm Replacement|Page 14065