Express 3500 V8-6.6L DSL Turbo VIN 2 (2006)
Air Duct: Service and Repair
Air Distributor Duct
AIR DISTRIBUTOR DUCT REPLACEMENT
REMOVAL PROCEDURE
1. Remove the engine cover.
2. Remove the I/P carrier.
3. Remove the air distribution duct retaining screws (2).
4. Remove the retaining screws at the instrument panel.
5. Remove the air distribution duct from the instrument panel.
INSTALLATION PROCEDURE
1. Install the air distribution duct to the instrument panel.
2. Install the air distribution duct retaining screws (2) to the instrument panel.
Tighten the screws to 4 N.m (35 lb in).
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the I/P carrier.
4. Install the engine cover.
