Express 4500 V8-6.0L (2010)
10. Install the recliner handle. Refer to Driver or Passenger Seat Recliner Handle Replacement (See: Service and Repair/Driver or Passenger Seat
Recliner Handle Replacement).
11. Position the seat back to the seat cushion assembly.
Caution: Refer to Fastener Caution (See: Service Precautions/Vehicle Damage Warnings/Fastener Caution).
12. Install the bolts (3, 7) and tighten to 32 Nm (24 lb ft).
13. Position the seat assembly to the seat adjuster assembly (4).
14. Install the bolts to secure the seat assembly to the adjuster (4) and tighten to 25 Nm (18 lb ft).
15. Install the seat into the vehicle. Refer to Driver or Passenger Seat Replacement (See: Service and Repair/Driver or Passenger Seat Replacement).
Warning
To avoid personal injuries, re-zero the passenger presence system whenever you remove or replace the seat cushion or trim. Failure to do so may cause
the system to malfunction.
16. Re-zero the inflatable restraint passenger presence system whenever the seat cushion or any component of the passenger presence system is
removed. Refer to Control Module References (See: Testing and Inspection/Programming and Relearning).
