Express 4500 V8-6.6L DSL Turbo (2009)
and Repair).
6. Prime the fuel system. Refer to Fuel System Priming (See: Service and Repair/Fuel System Priming).
7. Start the engine.
If the engine does not start, repeat the above step.
8. Inspect the fuel system for leaks.
Fuel Injection Fuel Feed Front Pipe Replacement - Right Side
Fuel Injection Fuel Feed Front Pipe Replacement - Right Side
Removal Procedure
1. Remove the engine cover. Refer to Engine Cover Replacement (See: Body and Frame/Access Cover/Service and Repair).
2. Remove the charge air cooler inlet pipe. Refer to Charged Air Cooler Hoses/Pipes Replacement (Inlet) (See:
Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charged Air Cooler Hoses/Pipes Replacement (Inlet))Charged Air Cooler
Hoses/Pipes Replacement (Outlet) (See: Turbocharger/Intercooler/Intercooler Duct/Service and Repair/Charged Air Cooler Hoses/Pipes
Replacement (Outlet)).
3. Remove the exhaust gas recirculation (EGR) valve. Refer to Exhaust Gas Recirculation Valve Replacement (See: Emission Control
Systems/Exhaust Gas Recirculation/EGR Valve/Service and Repair).
4. Remove the EGR bracket at front of engine.
5. Remove the fuel line/wire harness bracket bolts left front side of engine and position out of way.
6. Remove the fuel rail bracket bolt under the air cleaner snorkel.
7. Remove the pipe bracket bolt and bracket at front of the engine.
8. Remove the 2 fuel pipe bracket bolts.
9. Disconnect the fuel feed pipe fittings from the left fuel rail.
10. Disconnect the fuel feed pipe from the right fuel rail.
11. Remove the right fuel rail fuel feed pipe.
Installation Procedure
