G 10 1/2 Ton Van V8-305 5.0L VIN H 4-bbl (1984)
assembly.
4.
Use the child seat only in the third seat - seating position for which the anchor bracket has been installed. Use the child seat as directed in your
child seat manufacturer's usage instructions, latching the child seat top strap hook to the anchor bracket.
NOTICE:
IN THE EVENT THE CHILD SEAT ANCHORAGE ASSEMBLY IS REMOVED, THE 8 MM (5/16") DIAMETER HOLE MUST BE
PROPERLY RESEALED.
NOTICE:
IF THE HOLE PENETRATES TO THE EXTERIOR OF THE VEHICLE, APPLY A SEALANT BETWEEN THE ANCHOR BOLT
WASHER AND THE SHEET METAL TO PREVENT CARBON MONOXIDE FROM ENTERING THE VEHICLE. SUITABLE
SEALERS INCLUDE SILICONE, BUTYL OR ACRYLIC TYPE CAULKING.
IN THE EVENT THAT THE CHILD SEAT ANCHORAGE ASSEMBLY IS REMOVED, ALL BOLT HOLES PENETRATING TO THE
EXTERIOR OF THE VEHICLE MUST BE RESEALED TO PREVENT EXHAUST FUMES FROM ENTERING THE VEHICLE.
The hardware required to install the tether belt is provided by the child restraint manufacturer and must be installed as illustrated. If any of the hardware
not identified with a GM part number is not provided, contact the child restraint manufacturer. Those parts identified with a GM part number should be
procured from WDDGM.
