G 10 Van V8-379 6.2L DSL (1987)
TRANSMISSION MODELS:
All Models
FIGURE 2 - REVERSE INPUT CLUTCH ASSEMBLY
FIGURE 3 - REVERSE INPUT HOUSING AND DRUM ASSEMBLY
CHANGE TO ASSEMBLY COMPONENTS:(Figures 2 and 3)
New reverse input housing and drum assembly (605) is revised as follows:
^
Smaller (round versus rectangular) feed hole in hub is 2.413 mm (.095"); was 3.85 x 5.0 mm (.151 x .197")
^
Longer inner housing splines
^
Check valve retainer and ball assembly removed
