G 10 Van V8-393 6.5L DSL VIN P (1995)
Fuel Pressure: Technician Safety Information
WARNING:
Adhere to the following procedures any time the fuel system is being worked on in order to reduce the risk of fire and personal injury:
1. Place a "CAUTION FLAMMABLE" sign in the work area.
2. Always wear eye protection.
3. Always relieve the fuel system pressure prior to disconnecting fuel system components. For the fuel pressure release procedure, refer to Service
and Repair. See: Service and Repair
4. Always disconnect the negative battery cable except for those tests where battery voltage is required.
5. Always keep a dry chemical (Class B) fire extinguisher near the work area.
6. Use a suitable container to store or catch spilled fuel.
7. Do not replace fuel pipe with fuel hose.
8. Plug all disconnected line fittings or hoses.
9. After making any fuel system repairs ALWAYS inspect for fuel leaks by turning the ignition switch to the "ON" position for two seconds, then to
the "OFF" position for ten seconds. Again turn to the "ON" position and then check for leaks.
