G 10 Van V8-393 6.5L DSL VIN P (1995)
-
Fuel feed and return hoses to fuel sender fittings.
Tighten
-
Fuel feed and return hoses to sender pipe fittings to 22 Nm (16 lb. ft).
-
Fuel sender electrical connector and install retaining clips.
-
Fuel filler vent hose to vent pipe.
-
Fuel filler neck connecting tube to fuel tank,
-
Shield (if equipped).
Tighten
-
Fuel tank strap bolts or nuts to 13 Nm (115 lb. in.).
2. Negative battery cable.
3. Bleed air from system. Refer to Bleeding Air from Fuel Supply System. See: Service and Repair
4. Start engine and check for leaks.