G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
7. The rubber grommet from the cowl.
Front Parking Brake Cable
8. The front parking brake cable from the vehicle.
INSTALL OR CONNECT
1. The front parking brake cable through the vehicle.
2. The rubber grommet to the cowl.
3. The front parking brake cable to the parking brake pedal retainer.
4. The front parking brake cable to the parking brake pedal.
5. The parking brake release handle and cable. See: Parking Brake Release Handle/Service and Repair
6. The front parking brake cable to the rear parking brake cables.
7. Remove the pin from the parking brake pedal.
8. Set parking brake pedal to the full up position, then measure the threads on the equalizer. Adjust to the following specifications:
^
Passenger/Cargo to 13 mm (0.511 inch).
^
Cutaway/Upfitters to 27 mm (1.062 inch).
9. Verify that the vehicle will hold position with the parking brake pedal depressed.
10. Make additional adjustments as necessary. See: Adjustments
