G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
15. Install the camshaft sprocket and the timing chain.
16. Install the camshaft sprocket bolts.
^
Tighten the camshaft sprocket bolts to 25 Nm (18 ft. lbs.).
17. Install the intake manifold.
18. Install the distributor.
NOTE: Use care when engaging the front of the oil pan seal with the bottom of the engine front cover. Lubricate the front of the oil pan seal with
engine oil to aid in reassembly.
19. Install the engine front cover.
20. Install the oil pan.
21. Install the water pump.
22. Install the accessory drive pulley.
23. Install the engine cooling fan.
24. Install the air conditioning condenser.
25. Install the coolant reservoir.
26. Install the radiator.
27. Install the air conditioning compressor, the bracket, and the accessory drive bracket.
28. Install the air cleaner assembly and the duct.
29. Connect the negative battery cable.
30. Install the engine cover.
31. Fill the crankcase with the proper quantity and grade of engine oil.
32. Fill the cooling system with the proper quantity and grade of engine coolant.
33. Charge the air conditioning system.
34. Install the coolant reservoir.
