G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
Drive Belt: Service and Repair
Replacement
REMOVAL
1. Install a 3/8 inch drive breaker bar on the tensioner arm and rotate the arm counterclockwise.
2. Remove the drive belt.
INSTALLATION
1. Route the belt over all the pulleys except the tensioner pulley.
2. Observe belt routing for vehicles without air conditioning.
3. Observe belt routing for vehicles with air conditioning.
4. Install a 3/8 inch drive breaker bar on the tensioner arm and rotate the arm counterclockwise.
5. Install the belt over the tensioner pulley. Slowly release pressure.
