G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
Electronic Brake Control Module: Service and Repair
Module Assembly
REMOVE OR DISCONNECT
1. Negative battery cable.
2. Raise vehicle and properly support.
EHCU Cover To Fram
3. Three Electro-Hydraulic Control Unit (EHCU) shield bolts.
4. EHCU shield.
5. Four electrical connectors from the Electronic Brake Control Module (EBCM).
6. Four bolts that fasten the EBCM to the Brake Pressure Modulator Valve (BPMV).
7. EBCM from the BPMV. A light amount of force may be required.
NOTE:
^
Clean BPMV with a clean, dry cloth.