Restraint Systems: Air Bag Component Locations for G 1500 1/2 Ton Van V6-43L (1997)
The inflator modules consist of an inflatable bag and an inflator. An inflator consists of a canister of gas-generating material and an initiating device. The
initiator is part of the deployment loop. When the vehicle is in a frontal crash of sufficient force, the inflatable restraint Sensing and Diagnostic Module (
SDM) causes current to flow through the deployment loops. Current passing through the initiator ignites the material in the inflator module. The gas
produced from this reaction rapidly inflates the air bag.
There is a shorting bar on the inflatable restraint steering wheel module side of the upper steering column connector that connects the inflatable restraint
steering wheel module coil to the inflatable restraint steering wheel module. The shorting bar shorts across the inflatable restraint steering wheel module
circuits during the disconnection of the upper steering column connector. The shorting of the inflatable restraint steering wheel module circuitry will help
prevent unwanted deployment of the air bag when servicing the inflatable restraint steering wheel module, the steering column or other SIR system
components.
There is a shorting bar on the inflatable restraint I/P module connector that connects to the SIR wiring harness. The shorting bar shorts across the
inflatable restraint I/P module circuits during the disconnection of the inflatable restraint I/P module connector. The shorting of the inflatable restraint I/P
module circuitry will help prevent unwanted deployment of the air bag when servicing the inflatable restraint I/P module, the instrument panel or other
SIR system components.
Vehicles equipped with RPO ZX1 (driver seat only) use a trim cover instead of an inflatable restraint I/P module. This trim cover contains a diagnostic
resistor and a pigtail harness. The diagnostic resistor has a resistance value of 2 ohms. This 2 ohms value matches the internal resistance of an inflatable
restraint I/P module. The diagnostic resistor simulates the presence of an inflatable restraint I/P module. This allows the inflatable restraint Sensing and
Diagnostic Module (SDM) to sense the proper deployment loop resistance. If the diagnostic resistor malfunctions, the SDM will set the appropriate
DTC. The trim cover pigtail harness allows connection to the inflatable restraint I/P module harness connector.
