G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
10. Rack piston (26) to worm shaft (13) from J 21552, using J 8947 to compress seals.
-
Hold J 21552 tightly against worm shaft and turn stub shaft clockwise until rack piston (26) is seated on worm shaft (13).
Important: Make sure that all rack piston balls (25) are reinstalled in the rack piston. Improper rack piston ball installation may result in
personal injury.
11. Rack piston plug (27).
-
Tighten rack piston plug (27) to 150 Nm (111 ft. lbs.)
12. Housing end plug. Refer to "Housing End Plug Replacement."
13. Pitman shaft and side cover. Refer to "Pitman Shaft and Side Cover Replacement."
Adjust
-
Steering gear. Refer to "Steering Gear Adjustments."
Install or Connect
-
Steering gear. Refer to "Power Steering Gear Replacement."
Pitman Shaft Seals and Bearing Replacement
