chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Steering Knuckle|Service and Repair|Page 9856 > < Lower Control Arm and Bushing|Page 9852
Page 1
background image

Front Steering Knuckle: Service and Repair

^

Tool Required:
-

J 23742 Ball Joint Separator

-

Or Equivalent

Remove or Disconnect 

1. Raise the front of the vehicle and place floor stands under the front lift points.
2. The tire and wheel. 
3. The tie rod from the steering knuckle. 
4. The front brake caliper. Refer to Brakes and Traction Control.

Important:  Support the caliper with a piece of wire to prevent damage to the brake line.

Front Steering Knuckle|Service and Repair|Page 9856 > < Lower Control Arm and Bushing|Page 9852