G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
3. The rear spring U-bolts and anchor plate from the axle.
-
Lower the jack stand slightly to remove the axle form the rear spring. Lower the axle enough to remove the locator pin on the rear spring from
the axle.
4. The rear of the rear spring from the rear of the rear spring shackle.
5. The rear spring from the front frame hanger.
6. The nut and bolt retaining the rear shackle to the rear spring.
7. The rear spring from the vehicle and insert the spring into a suitable holding fixture.
8. The rear shackle.
