G 1500 1/2 Ton Van V6-4.3L VIN W (1997)
Install or Connect
1. The retainer and insulators to the shock absorber stem.
-
Fully extend the shaft.
2. The shock absorber up through the lower control arm and spring.
-
Insert the stem end through the hole in the frame bracket.
3. The insulators to the stem.
4. The retainer to the stem.
5. The nut.
-
Tighten the upper shock retaining nut to 16 Nm (12 ft. lbs.) while holding the stem with a wrench.
6. The bolts through the pivot holes to the lower control arm holes.
-
Tighten the lower shock bolts to 33 Nm (24 ft. lbs.).
7. Remove the safety stands.
8. Lower the vehicle.