chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

All Technical Service Bulletins: > < On-Vehicle Service Coil Spring|Page 9874
Page 1
background image

Suspension Strut / Shock Absorber: Customer Interest
Suspension - Body Lean When Turning

File In Section: 3 - Steering/Suspension

Bulletin No.: 66-30-02

Date: October, 1997

Subject: 
Body Lean When Turning 
(Replace Shock Absorbers)

Models: 1996-97 Chevrolet and GMC Passenger and Upfitter Conversion (RPO - YF7) G1 Models

Condition

Some owners may comment about a sensation of Body Lean when turning.

Correction

Replace the front and rear suspension shock absorbers with the part numbers listed below. These shock absorbers have higher capacity bores for
improved suspension motion control.

Service Procedure

Replace the front and rear suspension shock absorbers following the procedures in Sections 3C and 3D of the appropriate year G Van Service Manual.

Parts Information

P/N

Description

Qty

22177390

Shock Absorber, Front

2 required

22177391

Shock Absorber, Rear

2 required

Parts are currently available from GMSPO.

Warranty Information

For vehicles repaired under warranty, use the table.

All Technical Service Bulletins: > < On-Vehicle Service Coil Spring|Page 9874