chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Front Door and Windshield Molding - Wind Noise|Page 12887 > < Front Door and Windshield Molding - Wind Noise|Page 12885
Page 3
background image

Notice: 

When pressing against the inner sheet metal, be careful not to push directly against the outer sheet metal because it could be deformed.

4.

Mirror Head Opening (Figure # 4). On the inside of the driver's and passengers' doors, (under trim panels) locate the mirror wiring access hole and
fill it with RTV Silicone Sealer, P/N 12346286 or equivalent following the package instructions. Clean away any excess. Reinstall trim panel.

5.

Outer Door/Window Belt-line Seal (Figure # 5). Locate openings on the forward and rear portion of the outer door/window belt-line seal.
Sparingly apply RTV Silicone Sealer, P/N 12346286 or equivalent to close off both openings following the package instructions. Clean away any
excess.

Part Information

P/N

Description

Qty

12346286

RTV Silicone Sealer

1 Tube

 Parts are currently available from GMSPO.

Warranty Information

Front Door and Windshield Molding - Wind Noise|Page 12887 > < Front Door and Windshield Molding - Wind Noise|Page 12885