G 1500 1/2 Ton Van V8-5.7L VIN R (1997)
5. Mounting bolt and sleeve assemblies (2).
^
Tighten bolt (2) to 51 Nm (38 ft. lbs.). The bolt boots (1) must remain secure after tightening bolts.
6. Brake hose to caliper.
^
Tighten brake hose bolt to 45 Nm (33 ft. lbs.)
Caliper To Bracket Clearance
^
Measure clearance between caliper (12) and bracket stops (16). If necessary, remove caliper and file the ends of bracket (16) to obtain 0.26 to
0.60 mm (0.010 to 0.024 inch) total clearance. (Measure the clearances individually and add them together).
7. Bleed the brake system. See: Service and Repair
8. Tire and wheel.
WARNING: Before moving the vehicle, pump the brake pedal several times to make sure it is firm. Do not move the vehicle until a firm
pedal is obtained. Check the fluid level in the master cylinder after pumping the brakes.
