G 1500 1/2 Ton Van V8-5.7L VIN R (1997)
6. The front brake hose from the vehicle.
INSTALL OR CONNECT
1. The front brake hose to the vehicle.
2. The front brake hose with new gaskets.
3. The front brake hose and retaining bolt to the front brake caliper.
^
Tighten the front brake hose retaining bolt to the caliper to 50 Nm (37 ft. lbs.).
4. The front brake hose retaining bolt and bracket to the upper control arm.
5. The retaining nut and retaining clip to the front brake hose.
^
Tighten the front brake hose retaining bracket bolt and nut to the upper control arm to 20 Nm (15 ft. lbs.).
6. The front brake pipe to the brake hose.
^
Tighten the front brake pipe-to the brake hose to 20 Nm (15 ft. lbs.).
CAUTION: The hose must not be twisted or contact any suspension components after installation.
7. Bleed the brakes. See: Service and Repair
