G 1500 1/2 Ton Van V8-5.7L VIN R (1997)
5. Place an index mark on housing (20) even with one of the holes in the adjuster nut (65).
6. Measure back counterclockwise 13 mm (1/2 inch) and place a second mark on housing (20).
NOTICE: This will be different for some models.
7. Turn adjuster nut (65) counterclockwise until hole in adjuster nut (65) is aligned with the second mark on the housing (20).
8. Install coupling shield ret. and lock nut (48).
-
Tighten
-
Coupling shield ret. and lock lock nut (48) to 109 Nm (80 ft. lbs.) using a drift in a notch.
-
Hold adjuster nut (65) to maintain alignment of the marks.
9. Install steering gear. Refer to "Power Steering Gear Replacement."
