G 1500 1/2 Ton Van V8-5.7L VIN R (1997)
Suspension Strut / Shock Absorber: Service and Repair
Front Suspension
Remove or Disconnect
NOTICE: The front shock absorbers of the vehicle are multifunctional. In addition to contributing to a smooth ride they also provide the only stop to
the front suspension when fully extended. Therefore, when servicing the shock absorber, service replacement shock absorbers must be equivalent to
original shock absorbers In both extended length and strength. Use of shocks not complying to original equipment length or strength could result In
suspension over-travel or shock breakage. Suspension over-travel may result In suspension component breakage.
1. Raise the vehicle and support it with suitable safety stands.
2. Install a jackstand under the lower control arm and relieve the tension off the shock absorber.
3. The upper shock nut.
-
Hold the shock absorber stem with a wrench while backing the nut off.
4. The retainer.
5. The grommet.
6. The lower shock bolts.
-
Pull the shock absorber out from below.
-
The lower bushing and retainer remain on the stem.
