chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 7611 > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 7609
Page 1
background image

Fluid Line/Hose: Service and Repair

REMOVE OR DISCONNECT

1. Bolt securing the clip and transmission cooler lines to the engine.
2. Remove the four cooler lines from the four quick connect fitting on the transmission and radiator by using the following procedure:

-

Remove the plastic cap from the connector by pulling back along the pipe (about 2 inches).

A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 7611 > < A/T - Revised Converter Check Valve/Cooler Line Fitting|Page 7609