chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

A/C - Updated Wiring & Description Rear A/C Blower|Page 5441 > < A/C - Updated Wiring & Description Rear A/C Blower|Page 5439
Page 4
background image

FIGURE #4

Follow the Service procedure listed below:

1.

With ignition key in the "off" position, disconnect negative battery cable.

2.

Disconnect the three (3) wire connectors from the rear A/C system blower speed control resistor (see Figure #3).

3.

Remove the two (2) resistor retaining screws from the A/C evaporator inlet case.

4.

Remove the resistor from the case and discard.

A/C - Updated Wiring & Description Rear A/C Blower|Page 5441 > < A/C - Updated Wiring & Description Rear A/C Blower|Page 5439