G 20 3/4 Ton Van V8-305 5.0L VIN H 4-bbl (1984)
Figure A - 2nd Seat Installation - Left Seating Position
Left Seating Position
1.
Drill an 8 mm (5/16") diameter hole through the floor pan 76 mm (3") rearward of the front edge of the left wheelhouse on the center of the
elevated floor pan rib located 60 mm (2-3/8") inboard of the left wheelhouse. Refer to Figure A.
2.
To insure proper sealing of the hole, remove any dirt or foreign matter from around the hole on the underside of the floor pan where the sealer is to
be applied.
3.
Place sealer on the hole from the underside of the vehicle and assemble the bolt anchor bracket, two (2) 35 mm (1-3/8") O.D. spacer washers,
anchor plate and lock nut to the floor pan as shown in Figure A. Tighten securely and make certain that the hole is completely sealed.
4.
Use the child seat in the second seat - left seating position as directed in the usage instructions, latching the child seat top strap hook to the anchor
bracket.
