G 20 3/4 Ton Van V8-305 5.0L VIN H 4-bbl (1984)
2.
Place new bushing over segmented collet.
3.
Slide black expansion tube into segments.
4.
Turn cap to lock collet into place.
5.
Install new bushing into transmission by driving J 38119 in firmly with a plastic hammer.
6.
Turn cap to unlock collet.
7.
Remove J 38119.
8.
Remove collet.
9.
Install rear case seal.
10.
Connect propshaft to rear of transmission.
SERVICE MANUAL REFERENCE:
This procedure is not currently included in any Service Manual.
