chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Torque Converter - Squeak Noise|Page 8493 > < Torque Converter - Squeak Noise|Page 8491
Page 4
background image

SERVICE PARTS INFORMATION

P/N

Description

QTY

15988857

Plate

1 per door

15963207

Check Strap

1 per door

180018

Bolt

4 per door

Parts are currently available from GMSPO.

WARRANTY INFORMATION:

For vehicles repaired under warranty, use:

Technical Service Bulletin # 361012A

Date: 940401

Doors - Rear Cargo Door Limiter Correction

Group Ref.: Body

Bulletin No.: 361012A

Date: April, 1994

SUBJECT:
REAR CARGO DOOR INNER PANEL CRACKED OR BROKEN 
(INSTALL REINFORCEMENT PLATE AND CHECK STRAP)

MODELS:
1989-93 CHEVROLET AND GMC TRUCK G VANS

THIS BULLETIN IS BEING REVISED TO CHANGE THE WARRANTY INFORMATION. PLEASE DISCARD BULLETIN 361012.

CONDITION:

Some owners may comment that the right hand or left hand rear cargo door inner panel has started to crack in the attachment area of the door check strap
bracket. They may also comment that the door check attachment bolts will not hold torque.

CAUSE:

Repeated opening and closing of the rear cargo door can cause the inner panel to flex when over-coming the over-center load of the check strap. This
condition is more apparent on vehicles that are used in situations that require frequent cycling of the doors (i.e. delivery vehicles).

CORRECTION:

A new reinforcement plate (P/N 15988857), similar to the reinforced inside door panel currently used in 1994 G Van production, has been released to
address this condition. The reinforcement plate should be installed along with a new check strap (P/N 15963207). The check strap has a four bolt
attachment bracket that allows the load to be spread over a larger area of the inner panel.

SERVICE PROCEDURE:

Torque Converter - Squeak Noise|Page 8493 > < Torque Converter - Squeak Noise|Page 8491