chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Paint (Base Coat/Clear Coat) - Polishing Techniques|Page 8764 > < Paint - Polishing And Swirl Mark Removal|Page 8759
Page 1
background image

Paint: Technical Service Bulletins
Paint (Base Coat/Clear Coat) - Polishing Techniques

Number: 93-188-0B
Section: 0B
Date: MAY 1993
Corporate Bulletin No.: 111702R
ASE No.: B2

Subject:
POLISHING TECHNIQUES FOR BASE COAT/CLEAR COAT PAINT

Model and Year:
1985-1993 ALL PASSENGER CARS
1985-93 G, E, J, L, M, P TRUCKS 1988-93 C/K TRUCKS
1989-93 RN TRUCKS 1990-93 LUMINA APV

THIS BULLETIN CANCELS AND SUPERSEDES DEALER SERVICE BULLETIN NO. 87-166, DATED JUNE 1987 AND 91-251-0B, DATED,
MARCH 1991. ADDITIONAL INFORMATION HAS BEEN INCLUDED IN THE TEXT. ALL COPIES OF 87-166 AND 91-251-0B SHOULD BE
DISCARDED.

CARE OF EXTERIOR FINISHES (CLEANING AND POLISHING RECOMMENDATIONS).

APPLICATIONS:

ALL CARS AND TRUCKS WITH BASECOAT/CLEARCOAT PAINT FINISHES (EXCLUDES S/T TRUCK)

Today's basecoat/clearcoat paint finishes are very different from materials used on vehicles in the 1980's.

Materials, procedures and equipment which once worked well for polishing traditional finishes may not be acceptable for use on basecoat/clearcoat paint
surfaces. The use of outdated materials, procedures and equipment may produce what appears to be acceptable results under shop lighting, but will be
unacceptable to the customer when the finish is exposed to sunlight (typically, swirl marks).

While the following information can be most helpful in the new car "prep" area, it should also be made available to the "used car" area and the collision/
paint repair area.

KEEP THE VEHICLE CLEAN AND DRY

-

Avoid washing vehicles in direct sunlight.

-

Avoid using strong soaps or chemical detergents.

-

Use "brushless" type automatic car wash equipment.

-

Avoid using products containing acids (unless specified to correct a condition such as "rail dust").

-

Don't use brushes or brooms to remove snow or ice from vehicles in storage or on lots.

-

Cleaning agents and water should be dried promptly and not allowed to dry on the surface.

-

Standing rinse water should be dried promptly and not allowed to dry on the surface.

-

Drying with a soft chamois is recommended.

DON'T CREATE A PROBLEM

Paint (Base Coat/Clear Coat) - Polishing Techniques|Page 8764 > < Paint - Polishing And Swirl Mark Removal|Page 8759