chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Engine - Cold Knock|Page 2067 > < Engine - Cold Knock
Page 2
background image

1992 LB4 VIN Z
For vehicles with "cold knock" only.

For vehicles with "cold knock" having previously installed detonation field fix PROM

-

OR -

For vehicles with "cold knock" and detonation

For 1991-93 model year L05 and L19, 1991 and 1993 LB4 engines, two actions have been found to show a high probability of success incuring short
duration cold knock (Category A). General Motors suggests performing the following steps.

NOTE:
These steps are only applicable to short duration cold knock, and will not eliminate a knock occurring under load. Neither will these actions eliminate a
knock lasting more than 10 seconds, nor a knock occurring in a hot or warm engine.

Step 1:
Install a check valve oil filter

Original Filter

Install

PF35

AC PF1218

PF51

AC PF52

Step 2:
Change the oil; use a synthetic oil meeting the API Service SG or SG/CE standard.
NOTE:
This action is only required once; conventional (non-synthetic) API Service SG or SG/CE oil may be reinstalled at the next oil change.

If an LB4 (VIN Z 4.3L V6) or an L05 (VIN K 5.7L V8) continues to exhibit short duration cold knock after performing steps one and two and

Engine - Cold Knock|Page 2067 > < Engine - Cold Knock