G 20 Van V6-262 4.3L VIN Z (1993)
Ignition Coil: Service and Repair
Distributor And Coil 4.3L Engine
REMOVE OR DISCONNECT
-
Coil to distributor lead at coil.
NOTE Make sure ignition switch is "OFF".
-
Wiring connectors at side of the coil.
-
Nuts or screws holding coil bracket and coil to engine.
-
Coil bracket and coil.
^
Drill and punch out rivets holding coil to coil bracket.
-
Coil from coil bracket.
INSTALL OR CONNECT
-
Coil to coil bracket with screws.
-
Coil and coil bracket to engine. Tighten screws to 10 N-m (89 lb. in.).
-
Wiring connectors to the coil. Assure connectors are fully seated and latched.
-
Distributor lead to coil. Assure lead is fully seated on coil tower.
