G 20 Van V6-262 4.3L VIN Z (1993)
Separating Steering Linkage
2. Relay rod (2) from the pitman arm (5) with J 24319-01.
3. Pitman arm nut and washer.
^
Mark the pitman arms and the pitman shaft This will permit proper alignment at assembly.
NOTICE: Do not hammer on pitman arm, pitman shaft, or puller. Damage to pitman arm or steering gear may result.
Removing The Pitman Arm
4. Pitman arm (5) with J 6632-01 or J 29107.
INSPECT
^
Ball stud threads for damage.
^
Ball stud seals for excessive wear.
CLEAN
^
Threads on the ball stud and ball stud nut.
