G 20 Van V8-379 6.2L DSL (1987)
string or wire protrudes from the left front of the driver's side seat riser.
5.
On the driver's side only: attach the string or wire to the connector of the new buckle assembly and using the string or wire, pull the seat belt
warning wire through the seat riser.
6.
On the driver's side only: connect the seat belt warning wire at the connector under the seat at the left front of the seat riser and remove the string
or wire.
7.
Install a new bolt (P/N 15672738 for 1991 vehicles and P/N 3929459 for 1990-1987 vehicles), flat washer (P/N 2499982), wave washer(P/N
14056708)(in 1991 vehicles only), and new buckle assembly (Figure 1)(see the SERVICE PARTS INFORMATION section for the correct part
number). Be sure to align the metal tab on the buckle with the slot in the seat riser (Figure 1).
8.
Torque the bolt to 50 N-m (37 lbs.ft.).
9.
Install the access plug. A new plug will have to be painted to match the interior color.
SERVICE PARTS INFORMATION
Description
Part Number
Buckle Assembly
Driver's
Passenger's
Color
15681599
15681600
Cognac
15681601
15681602
Blue
15681603
15681604
Gray
15681605
15681606
Red
15681607
15681608
Black
Wave Washer
14056708
Flat Washer
2499982
Bolt (1991 Vehicles)
15672738
Bolt (1990 - 1987 Vehicles)
3929459
Parts are currently available from GMSPO.
WARRANTY INFORMATION
For vehicles repaired under warranty use:
Labor Op.
Description
Labor Time
C9180
Belt Assembly, Safety Front - Replace (RH)
0.2 hrs
C9181
Belt Assembly, Safety Front - Replace (LH)
0.2 hrs