G 20 Van V8-379 6.2L DSL VIN C FI (1992)
8)
Remove the left side steering column pencil brace upper retaining nut (Figure 2.)
9)
Remove the existing pencil brace and install the new brace behind the existing brace.
10)
Install the original brace removed in step 9.
11)
Raise the steering column and install the steering column support retaining nuts (Torque nuts 20-34 N-m) (15-25 lbs.ft).
12)
Connect the new brace below the steering column support and install the steering column bracket retaining bolts (Torque bolts 18-25 N-m) (13-18
lbs.ft).
