G 20 Van V8-393 6.5L DSL VIN Y (1995)
7. Defroster duct screw (62).
8. Temperature control cable.
9. Defroster control cable.
Fold the cable(s) back for access.
10. Heater case (33).
^
Three nuts at the engine compartment side of the distributor case and one screw on the passenger side.
^
Tilt the case assembly rearward at the top while lifting up until the core tubes clear the dash openings.
11. Screws (34).
12. Core clamps (29).
13. Core (35).
Install or Connect
1. Core (35).
^
Apply a bead of permagum sealer between the core and the case.
2. Core clamps (29).
3. Screws (34).
4. Heater case (33).
^
Apply a bead of permagum sealer between the heater case and the opening in the vehicle.
^
Tilt the case until the core tubes clear the cowl opening.
5. Temperature control cable.
6. Defroster control cable.
