chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Transmitter Battery Replacement|Page 11145 > < Tools - Keyless Entry Transmitter Tester|Page 11142
Page 1
background image

Keyless Entry Transmitter: Service and Repair
Transmitter Battery Replacement

Transmitter Battery

REMOVE OR DISCONNECT 

1. Insert a dime between the two halves of the transmitter near the key ring hole and twist the dime to open the transmitter.
2. The battery from the transmitter. 

INSTALL OR CONNECT

1. Install the battery into the transmitter cover positive side down. Use battery type CR2032 when replacing the battery.
2. Align the top and the bottom covers and snap them together.
3. Check the system operation.

Transmitter Battery Replacement|Page 11145 > < Tools - Keyless Entry Transmitter Tester|Page 11142