G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
3. The brake pipe retaining clips from the frame.
4. The brake pipe from the vehicle.
INSTALL OR CONNECT
1. The brake pipe to the vehicle.
2. The brake pipe retaining clips to the frame.
3. The brake pipe to the Electronic Brake Control Module (EBCM) unit.
^
Tighten the front brake pipe to the EBCM unit to 20 Nm (15 ft. lbs.).
4. The brake pipe to the front brake hose.
^
Tighten the front brake pipe to the front brake hose to 20 Nm (15 ft. lbs.).
5. Bleed the brake hydraulic system. See: Service and Repair