chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Air Door, HVAC > < Mechanical Specifications|Page 10032
Page 2
background image

1. The accumulator and bracket to the vehicle. 

Tighten

^

The screws to evaporator case to 6 N.m (53 lb. in).

2. The electrical connectors.
3. The A/c Lines to the accumulator.

Tighten

^

The compressor/condenser hose to accumulator to 48 N.m (35 lb. ft).

^

The evaporator outlet to the accumulator fitting 48 N.m (35 lb. ft).

4. The blower motor cover to the vehicle.
5. The orifice tube retainer to the evaporator cover.
6. The battery to the vehicle.
7. The positive and negative battery cables.
8. The coolant recovery or surge tank.
9. Recharge the refrigerant to the system. Refer to "Recharging the A/C System".

Air Door, HVAC > < Mechanical Specifications|Page 10032