chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Disabling the SIR System|Page 10393 > < Vacuum Reservoir HVAC|Specifications|Page 10386
Page 1
background image

Air Bag(s) Arming and Disarming: Service and Repair
Disabling the SIR System

Figure 11

Figure 12

Remove or Disconnect (Figures 11 and 12)

^

Turn the steering wheel to the straight ahead position.

^

Remove the key from the ignition switch.

1. AIR BAGS Fuse from the I/P fuse block.
2. Driver knee bolster.
3. Connector Position Assurance (CPA) and the driver yellow 2-way connector located near the base of the steering column.
4. Passenger knee bolster.
5. Connector Position Assurance (CPA) and the passenger yellow 2-way connector located behind the passenger knee bolster.

Important

With the AIR BAGS Fuse removed and the ignition switch in the RUN position, the AIR BAG warning lamp illuminates. This is normal operation and
does not indicate a SIR system malfunction.

Disabling the SIR System|Page 10393 > < Vacuum Reservoir HVAC|Specifications|Page 10386