chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Deployed Inflator Module|Page 10425 > < Deployed Inflator Module|Page 10423
Page 4
background image

Figure 32

30. Notify everyone in the immediate area that you intend to deploy the air bags. The deployment will be very loud. This may startle any uninformed

people in the area.

31. Place a power source near the shorted end of the SIR Deployment Harness. Use a vehicle battery when available, but always use a power source

that complies to the following:
^

12 volts minimum

^

2 amps minimum

32. Separate the two ends of the driver deployment harness wires (Figure 34).

Figure 33

Figure 34

CAUTION: When you are deploying an Inflator module for disposal, perform the deployment procedures In the order listed:

^

Wear safety glasses throughout the procedures.

^

Make sure the area around the inflator module is clear of all people and loose or flammable objects.

Deployed Inflator Module|Page 10425 > < Deployed Inflator Module|Page 10423