Frontal Sir System Preliminary Precautions
Air Bag Control Module: Service and Repair
Frontal SIR System Install or Connect
Install or Connect
1. Inflatable restraint Sensing and Diagnostic Module (SDM) to the vehicle, make sure the arrow is pointing toward the front of the vehicle.
2. SDM fasteners.
Tighten
^
Fasteners to 10 N.m (89 lb in).
3. Electrical connector and the CPA.
4. Carpet and the driver step well mat.
5. Driver seat.
^
Enable the SIR system. Refer to Air Bag(s) Arming and Disarming.
Tighten
SDM Fasteners to 10 N.m (89 lb in).