G 2500 3/4 Ton Van V8-305 5.0L VIN M SFI (1997)
Wheel Speed Sensor: Service and Repair
REMOVE OR DISCONNECT
1. Raise and support vehicle.
2. Tire and wheel.
3. Brake caliper.
4. Hub and rotor.
5. Wheel speed sensor wire electrical connector.
6. Bolt and washer at shock tower.
7. Snap-in clip on upper control arm (light duty models only).
8. Bolt and nut at ball joint.
9. Wheel speed sensor harness clip rivet.
^
Use a 3/16 inch drill bit to remove rivet.
10. Clips from the wheel speed sensor wire.
^
Save the clips for the replacement sensor.
11. Two wheel speed sensor mounting bolts.
12. Two splash shield mounting bolts.
13. Wheel speed sensor and splash shield assembly.
14. Splash shield gasket.
